/ User Guide Flaneurz

To better visualize the movements, you can check out our tutorial:

Tutorial video Flaneurz

Each detachable Flaneurz roller skate is tested to ensure it meets the quality standards we set for ourselves.

/ Usage Tips​

How to unclip

This product is suitable for beginner, intermediate, and advanced skaters. For beginners, a few lessons may be helpful to master the most basic skating techniques, such as braking phases, gentle slopes, safely handling falls, and managing turns.

Roller skating is not recommended for individuals with conditions that may affect their mobility and physical reflexes.

For maximum safety, equip yourself with protective gear (helmet, knee pads, elbow pads, wrist guards)

Upon receipt and before each use of your detachable rollers, check that:

/ The trucks should be well secured​

(Iconic: 14mm socket wrench or open-end wrench

Premium: tightening nut (17mm flat wrench)

locking screw for the clamping nut (4mm Allen key)

keys provided in your Roll Line tool kit)

/ The wheels should be properly tightened

(Iconic / Premium: 13mm socket wrench)

/ The front stops should be well tightened​

(Iconic / Premium: 5mm Allen key included in your Roll Line tool kit)

Thus, you can skate with complete confidence.

Avoid steep slopes that make it more difficult to control your speed and may reduce your ability to brake.

Avoid wet and/or snowy sidewalks and roads, ice patches, fuel or oil spills, driveways covered with large stones, gravel, sand, and any other surface where the grip between the wheel and the ground may be compromised. These surfaces affect your braking and are harmful to your bearings.

Avoid skating near roads and cars; prefer designated pedestrian pathways.

Look around you as much as possible and stay alert. Be careful of pedestrians while skating and make sure you can stop whenever necessary. Sudden or poorly controlled braking can lead to breakage situations not covered by the warranty.

Find out about the legislation in force in the country where you are skating, governing the practice of roller skating. Flaneurz cannot be held responsible for legal issues related to the practice of roller skating.

Flaneurz disclaims all responsibility in the event of an accident and cannot be held liable for any damages related to or resulting from the use of this product.

/ Interview

Shoes

Make sure that the fastening systems (Velcro and/or laces) specific to the shoes are in good condition. Replace them if necessary. The outsole (in contact with the ground or chassis) is reworked to adapt to the fastening constraints of the chassis.

Make sure that nothing interferes with the contact between the sole and the rolling part for optimal attachment (gravel stuck in the sole, in the housings, chewing gum, clumps of tar). If necessary, use the unlocking key to scrape off impurities, and clean the sole with a damp cloth.

Cleanliness: clean the shoe using, for example, a stiff brush or a damp cloth to wipe the outer part. Let your shoes air dry as often as possible. Do not put them in the washing machine or the dryer.

Avoid placing the product near a heat source that is too high (such as a radiator or a fireplace) as it could damage the materials of the shoe during a too-rapid drying process.

/ Front stops and plugs

To extend the lifespan of your front bumpers and plugs, rotate them regularly so they wear evenly.

/ Wheels and bearings

The wheels wear unevenly depending on your skating. It is recommended to switch their positions on your trucks to increase their longevity. Check for any chips or flat spots on the wheels to maintain your skating comfort.

The bearings need regular cleaning and should be replaced if you skate very often. Check your equipment every 5 to 10 outings. Skating in the rain damages the bearings, and we advise against doing it.

/ System & chassis​

The mechanical system (rear hooks) should neither be oiled nor greased (products like WD40). These greasy products will clump dirt together, which will clog the system and cause it to jam. It can be cleaned with a soft cloth to remove dust, or with a dusting spray.

The chassis does not require specific attention. You can clean it with a soft, damp cloth. The grip can be maintained with a stiff brush and a small amount of soapy water.

/ Copyright©​

Texts, layout, photographs, illustrations: Flaneurz SAS. All rights reserved. No section of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the written permission of Flaneurz.

FLANEURZ SAS

17 Rue Méhul 93500 Pantin - FRANCE

www.flaneurz.com

+33 (0)1 48 36 42 68

/ Warranty - Customer Service

The products are neither exchangeable nor refundable beyond the withdrawal period, except in the case of a manufacturing defect. These products come with a 2-year warranty for manufacturing defects. During this period, Flaneurz commits to repair or replace, at the sole discretion of Flaneurz, any defective products related to a manufacturing defect. The warranty does not cover an error in the purchased size or a comfort issue. In case of doubts, we recommend visiting a physical store to try on the different models of shoes and sizes. This warranty is attached to the customer who made the initial purchase and is therefore non-transferable. Flaneurz does not guarantee the waterproofness of the shoes.

This warranty does not cover resulting damages:

/ From negligent, inappropriate, or abusive use or damage caused by poor maintenance.​

/ Normal wear and tear of the product.​

/ From a strong violent impact or intentional damage.​

/ From any technical modification made by the user.​

For more information, contact Flaneurz at

[email protected]